Prominent & Leading Manufacturer from Noida, we offer construction aac block, white aac blocks, partition walls aac blocks, water resistant aac blocks, 115 mm aac light weight blocks and 150 mm aac blocks.
The superior insulation of Construction AAC Block provides a comprehensive building material solution for indoor and outdoor construction. They are quick to install and can shape up any building project real quick. They can be cut, routed or sanded to fit in the varying requirements of a construction site. They are apt for urban construction that has a sharp temperature rise gradient. We test the blocks to ensure maximum strength.
Features:
Light weight and excellent thermal and sound insulation
AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
: AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
Customers can avail from us a qualitative array of 115 mmAAC Light Weight Blocks. These blocks are highly appreciated for its high strength and dimensional accuracy. Designed with accuracy, we ensure longer service life of these products. These blocks are made as per the set values and are offered in different dimensions. Buyer can avail these valves as per their requirements.
AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
: AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
: AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
: AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
Our firm is keenly engaged in the Manufacturing of AAC Blocks in the market. These blocks are furnished under the guidance of professionals who grip expertise in this domain. Our products have great finishing and come with a very attractive price for the quality and reliability offered.
AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
: AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
: AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
AAC BLOCK ADHESIVE Mod Bond is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of 3mm to 12mm thickness, that meet and exceed the requirements of National and International Standards. Thixotropic is a time-dependent shear thinning property. Certain gels or fluids that are thick (viscous) under static conditions will flow (become thin, less viscous) over time when shaken, agitated, or otherwise stressed (time dependent viscosity). Coverage: Approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness. Normally, 30-35 kg of adhesive is required for mounting one cubic meter AAC block in 2-3 mm thick mortar. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. Suitable Substrate £ Aerated light weight blocks £ Concrete blocks £ Cement mortar blocks/bricks £ Concrete hollow blocks £ Cellular concrete blocks £ Fly Ash bricks Package: 40 Kgs bag
Request Callback
Yes! I am interested
Lightweight Block broken rubble
Ask For Price
Product Price :Get Latest Price
Product Details:
Size
9 In. X 4 In. X 3 In.
Usage/Application
Floor
Material
Autoclaved Aerated Concrete
Product Type
Blocks
Color
Grey
Shape
Rectangular
Brick/Block Color
Grey
Country of Origin
Made in India
lightweight block broken rubble in rough design and in rectangular shape in 9 in.* 4in.* 3in. for floor use in good quality.
